# MCFx2 (ALM Busy Circuits)

Canonical page: https://eurorackref.com/alm-busy-circuits/mcfx2/

- id: `alm-busy-circuits/mcfx2`
- width: 14 HP; depth: 32 mm
- power: +12 V 85 mA, −12 V 85 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Multimode Filter, Simultaneous Multimode Outputs, Self-Oscillating Filter, 1V/Oct Pitch Tracking, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| In L | audio | filter audio input | not stated | unknown | — | 1215 |
| V/Oct L | pitch | cutoff key tracking | not stated | unknown | — | 1215 |
| Freq In L | cv | cutoff CV | -5 to 5 V | bipolar | — | 1215 |
| Res In L | cv | resonance CV | -5 to 5 V | bipolar | — | 1215 |
| In R | audio | filter audio input | not stated | unknown | In L | 1215 |
| V/Oct R | pitch | cutoff key tracking | not stated | unknown | — | 1215 |
| Freq In R | cv | cutoff CV | -5 to 5 V | bipolar | — | 1215 |
| Res In R | cv | resonance CV | -5 to 5 V | bipolar | — | 1215 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Low L | audio | low pass output | not stated | unknown | Left filter core | 1215 |
| High L | audio | high pass output | not stated | unknown | Left filter core | 1215 |
| BP/Notch L | audio | band pass or notch | not stated | unknown | Left filter core | 1215 |
| Low R | audio | low pass output | not stated | unknown | Right filter core | 1215 |
| High R | audio | high pass output | not stated | unknown | Right filter core | 1215 |
| BP/Notch R | audio | band pass or notch | not stated | unknown | Right filter core | 1215 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Freq L | knob | base cutoff frequency | — | Left filter core | 1215 |
| Resonance L | knob | resonance level | — | Left filter core | 1215 |
| Freq CV attenuverter L | knob | Freq CV attenuversion | — | Freq In L | 1215 |
| Res CV attenuator L | knob | Res CV attenuation | — | Res In L | 1215 |
| BP/Notch jumper L | jumper | BP or Notch select | — | BP/Notch L | 1215 |
| Freq R | knob | base cutoff frequency | — | Right filter core | 1215 |
| Resonance R | knob | resonance level | — | Right filter core | 1215 |
| Freq CV attenuverter R | knob | Freq CV attenuversion | — | Freq In R | 1215 |
| Res CV attenuator R | knob | Res CV attenuation | — | Res In R | 1215 |
| BP/Notch jumper R | jumper | BP or Notch select | — | BP/Notch R | 1215 |
| Link | button | link cutoff controls | — | Left filter core, Right filter core, Freq L, Freq R | 1215 |
| Feed | button | series routing | — | In R, Right filter core | 1215 |
| Feed jumper | jumper | fed filter type select | — | Feed, Right filter core | 1215 |
| V/Oct trimmers | other | V/Oct tracking calibration | — | V/Oct L, V/Oct R | 1215 |

## Modes

- Linked (Link = on) [1215]
- Series (Feed = on) [1215]
- Parallel (Feed = off) [1215]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 14 HP | — | 1215 |
| module | depth | 32 mm | — | 1215 |
| module | +12V current | 85 mA | — | 1215 |
| module | -12V current | 85 mA | — | 1215 |
| filter outputs | slope | 18 dB/oct | — | 1215 |
| filter core | poles | 3 poles | — | 1215 |
| V/Oct | tracking range | ≥ 2 octaves | — | 1215 |
| Freq In / Res In | expected input range | -5 to 5 V | — | 1215 |
| module | filter cores | 2 cores | — | 1215 |

## Behavior

- In R: when unpatched, Feed off → normalled from In L [1215]
- Feed: when enabled → left core feeds right input [1215]
- Feed: when In R patched → patched signal overrides feed [1215]
- In L normal: when Feed enabled → normal to In R removed [1215]
- Link: when enabled → Freq L controls both cores [1215]
- Freq R: when Link enabled → sets right core max range [1215]
- cores: when Link on, Freq R CW → both cores track together [1215]
- Resonance: when past 12 o'clock → self oscillation, aggressive [1215]
- In: when hot input levels → filter overdrives [1215]
- self-oscillating filter: when V/Oct patched → playable sine oscillator [1215]
- calibration: when 1V at V/Oct → tune to C1 [1215]
- calibration: when 3V at V/Oct → trim to C3 [1215]

## Sources

- [1215] ALM030 'MCFx2' Operation Manual (manual): https://assets.busycircuits.com/docs/alm030-manual.pdf
- [1216] alm-busy-circuits MCFx2 product page (product_page): https://busycircuits.com/products/alm030

Full record as JSON: https://eurorackref.com/alm-busy-circuits/mcfx2.json
