# Akemie's Taiko (ALM Busy Circuits)

Canonical page: https://eurorackref.com/alm-busy-circuits/akemies-taiko/

- id: `alm-busy-circuits/akemies-taiko`
- width: 18 HP; depth: 32 mm
- power: +12 V 70 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: Drum Voice, Digital / Wavetable Oscillator, Complete Voice, 1V/Oct Pitch Tracking

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| V/Oct (Freq Start) | pitch, cv | base frequency pitch | 0 to 8 V | unipolar | not stated | 1824 |
| V/Oct (Freq End) | pitch, cv | end frequency pitch | 0 to 8 V | unipolar | not stated | 1824 |
| Trigger | trigger | hit trigger | 0 to 5 V | unknown | not stated | 1824 |
| Acc | trigger | accent trigger | 0 to 5 V | unknown | not stated | 1824 |
| Choke | trigger | choke trigger | 0 to 5 V | unknown | not stated | 1824 |
| Algo CV | cv | algorithm select CV | unknown | unknown | not stated | 1824 |
| Release 1 CV | cv | release 1 CV | unknown | unknown | not stated | 1824 |
| Release 2 CV | cv | release 2 CV | unknown | unknown | not stated | 1824 |
| Waves CV | cv | waveform combination CV | unknown | unknown | not stated | 1824 |
| Ratio CV | cv | operator ratio CV | unknown | unknown | not stated | 1824 |
| Fb CV | cv | feedback CV | unknown | unknown | not stated | 1824 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out | audio | audio out | not stated | unknown | FM voice | 1824 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Algo | knob | algorithm select | 1 to 6 algorithm | FM voice | 1824 |
| Release 1 | knob | operator 1/3 release | 1 to 16 steps | Release envelopes | 1824 |
| Release 2 | knob | operator 2/4 release | 1 to 16 steps | Release envelopes | 1824 |
| Waves | knob | waveform combination | — | FM voice | 1824 |
| Ratio | knob | operator frequency ratios | — | FM voice | 1824 |
| Fb | knob | operator 1 feedback | 0 to 7 steps | FM voice | 1824 |
| Freq Start | knob | base frequency | — | FM voice, V/Oct (Freq Start) | 1824 |
| Speed | knob | frequency ramp speed | — | Frequency ramp | 1824 |
| Freq End | knob | end frequency | — | Frequency ramp, V/Oct (Freq End) | 1824 |
| Freq Start fine | knob | fine tuning | — | FM voice | 1824 |
| Attenuverter 1 | knob | CV attenuversion | — | — | 1824 |
| Attenuverter 2 | knob | CV attenuversion | — | — | 1824 |
| Attenuverter 3 | knob | CV attenuversion | — | — | 1824 |
| V/Oct trimmer | other | pitch tracking calibration | — | V/Oct (Freq Start) | 1824 |

## Modes

- 2 operator [1824]
- 4 operator [1824]
- Frequency ramp [1824]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 18 HP | — | 1825 |
| module | depth | 32 mm | — | 1825 |
| module | +12V current | 70 mA | — | 1825 |
| module | -12V current | 30 mA | — | 1825 |
| FM voice | algorithms | 6 count | — | 1824 |
| FM voice | operators | 4 count | algorithms 3-6 | 1824 |
| FM voice | operators | 2 count | algorithms 1-2 | 1824 |
| FM voice | waveforms | 8 count | — | 1824 |
| Waves | waveform combinations | 64 count | — | 1824 |
| Release envelopes | release steps | 16 steps | — | 1824 |
| Fb | feedback range | 0 to 7 steps | — | 1824 |
| Freq Start | pitch tracking range | 5 octaves | — | 1824 |
| CV inputs | input range | 0 to 5 V | — | 1824 |
| attenuverted inputs | input range | -5 to 5 V | — | 1824 |

## Behavior

- all controls and inputs: when trigger received → values snapshotted [1824]
- controls: when hit playing → no effect on sound [1824]
- V/Oct (Freq Start): when changed after trigger → ignored until next hit [1824]
- Choke: when trigger arrives → sound stops immediately [1824]
- Acc: when trigger arrives → hit emphasised [1824]
- Trigger: when rising edge ~3V → starts hit [1824]
- Speed: when below ~9pm → no frequency ramp [1824]
- Frequency ramp: when Speed past ~9pm → start moves to end frequency [1824]
- Frequency ramp: when envelope still open → resets and repeats [1824]
- Speed: when increased → faster transition [1824]
- Ratio: when turned clockwise → ratios generally increase [1824]
- Fb: when some algorithm combinations → little effect [1824]
- white knob: when CV patched → CV added to offset [1824]
- parameter changes: when while adjusting → possible steps and clicks [1824]

## Sources

- [1824] ALM Busy Circuits Akemie's Taiko manual (manual): https://assets.busycircuits.com/docs/alm015-manual.pdf
- [1825] ALM Busy Circuits Akemie's Taiko product page (product_page): https://busycircuits.com/pages/alm015

Full record as JSON: https://eurorackref.com/alm-busy-circuits/akemies-taiko.json
