# Ring SM (AJH Synth)

Canonical page: https://eurorackref.com/ajh-synth/ring-sm/

- id: `ajh-synth/ring-sm`
- width: 14 HP; depth: 24 mm
- power: +12 V 55 mA, −12 V 50 mA, +5 V ? mA
- status: current
- functions: Ring Modulator, Sub Oscillator, Mixer, Distortion / Saturation

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| X IN | audio | carrier input | -5 to 5 V | bipolar | — | 1822 |
| Y IN | audio | modulator 1 input | -5 to 5 V | bipolar | — | 1822 |
| Z IN | audio | modulator 2 input | -5 to 5 V | bipolar | — | 1822 |
| IN 1 | audio, cv | mixer channel 1 | -5 to 5 V | bipolar | Ring modulator core | 1822 |
| IN 2 | audio, cv | mixer channel 2 | -5 to 5 V | bipolar | X IN | 1822 |
| IN 3 | audio, cv | mixer channel 3 | -5 to 5 V | bipolar | Y IN | 1822 |
| IN 4 | audio, cv | mixer channel 4 | -5 to 5 V | bipolar | Sub Bass -1 | 1822 |
| IN 5 | audio, cv | mixer channel 5 (hot) | -2.5 to 2.5 V | bipolar | Sub Bass -2 | 1822 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT | audio, cv | main mixer output | -6 to 6 V | bipolar | Mixer | 1822 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| X Input Level | knob | carrier level to RM | — | X IN, Ring modulator core | 1822 |
| Y Input Level | knob | modulator 1 level | — | Y IN, Ring modulator core | 1822 |
| Z Input Level | knob | modulator 2 level | — | Z IN, Ring modulator core | 1822 |
| RM LEVEL | knob | mixer channel 1 level | — | Mixer, IN 1 | 1822 |
| X MIX | knob | mixer channel 2 level | — | Mixer, IN 2 | 1822 |
| Y MIX | knob | mixer channel 3 level | — | Mixer, IN 3 | 1822 |
| SUB-1 | knob | mixer channel 4 level | — | Mixer, IN 4 | 1822 |
| SUB-2 | knob | mixer channel 5 level | — | Mixer, IN 5 | 1822 |
| OUT LEVEL | knob | overall output level | — | OUT, Mixer | 1822 |
| DOUBLE | switch | frequency double select | — | Ring modulator core, X IN, Y IN | 1822 |

## Modes

- Frequency double (DOUBLE = down) [1822]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 14 HP | — | 1822 |
| module | depth | 24 mm | — | 1822 |
| module | depth with power cable | 34 mm | — | 1822 |
| module | panel height | 128.5 mm | — | 1822 |
| module | +12V current | 55 mA | — | 1822 |
| module | -12V current | 50 mA | — | 1822 |
| inputs | tolerated level | ≤ 10 V | +/-10V, may clip | 1822 |
| Sub Bass generators | useful frequency | ≤ 1000 Hz | — | 1822 |
| Sub Bass -1 | octave offset | -1 octaves | — | 1822 |
| Sub Bass -2 | octave offset | -2 octaves | — | 1822 |
| Frequency double | octave offset | 1 octaves | — | 1822 |
| Mixer | unity gain channel position | 9 dial position | OUT LEVEL at 10; ch1-4 | 1822 |
| Mixer | unity gain channel position | 8 dial position | OUT LEVEL at 10; ch5 | 1822 |
| Hot channel 5 | overdrive onset position | 7 to 8 dial position | +/-5V input | 1823 |
| Sub Bass generators | lock time | 1 cycles | — | 1822 |

## Behavior

- IN 1: when unpatched → RM output normalled [1822]
- IN 1: when patched → RM output disconnected [1822]
- IN 2: when unpatched → X IN normalled [1822]
- IN 3: when unpatched → Y IN normalled [1822]
- IN 4: when unpatched → Sub Bass -1 normalled [1822]
- IN 5: when unpatched → Sub Bass -2 normalled [1822]
- IN 2-5: when patched → normalled source disconnected [1822]
- X MIX / Y MIX: when through signal used → X/Y Input Level ignored [1822]
- Sub Bass generators: when always → X Input Level ignored [1822]
- DOUBLE: when switched down → X connected to Y [1822]
- Frequency double: when sine or triangle input → RM output one octave up [1822]
- Frequency double: when high harmonic content input → doubling may fail [1822]
- Sub Bass generators: when no X input → produce random sound [1822]
- Sub Bass generators: when complex or noisy X input → tracking may mistrigger [1822]
- Sub Bass waveform: when lower frequencies → rounded trapezoid shape [1822]
- Sub Bass waveform: when 100Hz and above → more sine-like [1822]
- Sub Bass generators: when higher frequencies → level falls off [1822]
- Mixer: when channel knob at 10 → clips with single input [1822]
- Mixer: when unused channel knobs up → noise bleed-through [1822]
- Mixer: when DC bias on channel → asymmetric clipping [1822]
- IN 5: when signal exceeds threshold → hard clips earlier [1822]
- Sub Bass -2: when routed to mixer → lower level compensates hot channel [1822]
- RM inputs: when fixed CV applied → no useful effect [1822]

## Sources

- [1822] AJH Synth Ring SM manual (manual): https://ajhsynth.com/pdf/Ring%20SM%20User%20Manual.pdf
- [1823] AJH Synth Ring SM product page (product_page): https://ajhsynth.com/Ring_SM.html

Full record as JSON: https://eurorackref.com/ajh-synth/ring-sm.json
