# MiniMod VCF (AJH Synth)

Canonical page: https://eurorackref.com/ajh-synth/minimod-vcf/

- id: `ajh-synth/minimod-vcf`
- width: 14 HP; depth: 26 mm
- power: +12 V 45 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Self-Oscillating Filter, 1V/Oct Pitch Tracking, Mixer, Vactrol, Distortion / Saturation

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio Input 1 | audio | mixer input 1 | -5 to 5 V | bipolar | — | 1820 |
| Audio Input 2 | audio | mixer input 2 | -5 to 5 V | bipolar | — | 1820 |
| Audio Input 3 | audio | mixer input 3 | -5 to 5 V | bipolar | — | 1820 |
| Freq. CV Input | cv | cutoff CV | not stated | unknown | — | 1820 |
| 1V/Oct Input | pitch, cv | cutoff 1V/oct | not stated | unknown | — | 1820 |
| 1/3 CV Input | cv | keyboard 1 tracking | not stated | unknown | — | 1820 |
| 2/3 CV Input | cv | keyboard 2 tracking | not stated | unknown | — | 1820 |
| Emp. CV Input | cv | emphasis CV | -5 to 5 V | bipolar | — | 1820 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio Output | audio | filtered output | -5 to 5 V | bipolar | Filter core, Output stage | 1820 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Input 1 Level | knob | input 1 mix level | 0 to 100 % | Audio Input 1, Input mixer | 1820 |
| Input 2 Level | knob | input 2 mix level | 0 to 100 % | Audio Input 2, Input mixer | 1820 |
| Input 3 Level | knob | input 3 mix level | 0 to 100 % | Audio Input 3, Input mixer | 1820 |
| Cutoff Freq. | knob | cutoff / CV offset | — | Filter core | 1820 |
| Freq. CV Level | knob | cutoff CV amount | 0 to 130 % | Freq. CV Input | 1820 |
| Emphasis Level | knob | resonance / CV offset | — | Filter core | 1820 |
| Emph. CV Level | knob | emphasis CV amount | 0 to 100 % | Emp. CV Input | 1820 |
| Gain Jumper | jumper | overdrive select (J1) | — | Input mixer, Filter core | 1820 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 14 HP | — | 1820 |
| module | depth | 26 mm | — | 1820 |
| module | panel height | 128.5 mm | — | 1820 |
| module | +12V current | 45 mA | — | 1820 |
| module | -12V current | 30 mA | — | 1820 |
| Filter core | slope | 24 dB/oct | — | 1820 |
| 1V/Oct Input | cutoff scaling | 1 V/oct | — | 1820 |
| 1/3 CV Input | cutoff scaling | 3 V/oct | — | 1820 |
| 2/3 CV Input | cutoff scaling | 1.5 V/oct | — | 1820 |
| Freq. CV Input | sensitivity vs 1V/oct | 30 % | about 30% more | 1820 |
| Freq. CV Level | 1V/oct position | 7 dial position | 2 o'clock | 1820 |
| self-oscillation | pitch tracking range | 3 to 4 octaves | — | 1820 |
| Emphasis Level | self-oscillation onset | 8 to 10 dial position | — | 1820 |
| Gain Jumper | gain increase | 70 % | jumper removed; manual | 1820 |
| Gain Jumper | gain increase | 2 x | jumper removed; product page | 1821 |
| Filter core | supply voltage | 10 V | +/-10V rails | 1821 |
| Output stage | THD | 0.008 % | at 1 kHz | 1821 |
| Audio Output | gain | 1 x | single +/-5V input at 100% | 1820 |
| Scale Adjust | calibration target | 1760 Hz | 2V into 1V/Oct, 440Hz base | 1820 |
| Range Adjust | calibration target | 440 Hz | Cutoff at -1, Emphasis 10 | 1820 |

## Behavior

- Cutoff Freq.: when CV applied → acts as offset [1820]
- Cutoff Freq.: when fully counter clockwise → no audio output [1820]
- Cutoff Freq.: when maximum → passes all frequencies [1820]
- Emphasis Level: when external emphasis CV applied → acts as offset [1820]
- Emphasis Level: when between positions 8 and 10 → filter self-oscillates [1820]
- 1V/Oct Input: when filter self-oscillating → sets sine pitch [1820]
- 1V/Oct Input: when always → emulates keyboard switches 1+2 [1820]
- 1/3 CV Input: when always → emulates keyboard switch 1 [1820]
- 2/3 CV Input: when always → emulates keyboard switch 2 [1820]
- Audio Inputs: when DC CV patched → not useful, no harm [1820]
- Gain Jumper: when removed → overdrives filter core [1820]
- Gain Jumper: when removed → output level rises proportionately [1820]
- CV tracking: when ambient temperature changes → may drift [1820]

## Sources

- [1820] AJH Synth MiniMod VCF manual (manual): https://ajhsynth.com/pdf/MiniMod%20VCF%20User%20Manual.pdf
- [1821] AJH Synth MiniMod VCF product page (product_page): https://ajhsynth.com/VCF.html

Full record as JSON: https://eurorackref.com/ajh-synth/minimod-vcf.json
