# MiniMod Dual Contour (AJH Synth)

Canonical page: https://eurorackref.com/ajh-synth/minimod-dual-contour/

- id: `ajh-synth/minimod-dual-contour`
- width: 12 HP; depth: 26 mm
- power: +12 V 38 mA, −12 V 15 mA, +5 V ? mA
- status: current
- functions: ADSR Envelope

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Gate 1 | gate, trigger | gate input | 2 to 12 V | unipolar | bus trigger | 1016 |
| Gate 2 | gate, trigger | gate input | 2 to 12 V | unipolar | bus trigger | 1016 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Output 1 | cv | contour output | 0 to 8 V | unipolar | Contour Generator 1 | 1016 |
| Output 2 | cv | contour output | 0 to 8 V | unipolar | Contour Generator 2 | 1016 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Attack 1 | knob | attack time | — | Contour Generator 1 | 1016 |
| Decay 1 | knob | decay/release time | — | Contour Generator 1 | 1016 |
| Sustain 1 | knob | sustain level | 0 to 10 dial position | Contour Generator 1 | 1016 |
| Decay switch 1 | switch | AD/ADSD select | — | Contour Generator 1 | 1016 |
| Manual trigger 1 | button | manual gate | — | Contour Generator 1 | 1016 |
| Output jumper | jumper | output level reduce | — | — | 1016 |
| Attack 2 | knob | attack time | — | Contour Generator 2 | 1016 |
| Decay 2 | knob | decay/release time | — | Contour Generator 2 | 1016 |
| Sustain 2 | knob | sustain level | 0 to 10 dial position | Contour Generator 2 | 1016 |
| Decay switch 2 | switch | AD/ADSD select | — | Contour Generator 2 | 1016 |
| Manual trigger 2 | button | manual gate | — | Contour Generator 2 | 1016 |

## Modes

- AD (1) (Decay switch 1 = up) [1016]
- ADSD (1) (Decay switch 1 = down) [1016]
- AD (2) (Decay switch 2 = up) [1016]
- ADSD (2) (Decay switch 2 = down) [1016]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Output | nominal range | 0 to 8 V | — | 1016 |
| Output | maximum level | 10.5 V | multiple retriggering | 1016 |
| Output jumper | output reduction | 30 % | — | 1016 |
| Gate | trigger level | 2 to 12 V | — | 1016 |
| Sustain | original Model D maximum | 80 % | — | 1016 |
| Sustain | original behaviour setting | 8.5 dial position | — | 1016 |
| circuit | supply voltages | -10 to 9.3 V | — | 1016 |
| module | width | 12 hp | — | 1016 |
| module | depth | 26 mm | — | 1016 |
| module | current +12V | 38 mA | — | 1016 |
| module | current -12V | 15 mA | — | 1016 |

## Behavior

- contour: when AD mode, gate held → no effect after trigger [1016]
- contour: when AD mode, attack completes → decay begins [1016]
- Sustain: when AD mode → deactivated [1016]
- contour: when ADSD mode, gate high → holds sustain level [1016]
- contour: when ADSD mode, gate released → decay curve begins [1016]
- contour: when retrigger before cycle completes → next attack peak higher [1016]
- contour: when three or four rapid retriggers → maximum level reached [1016]
- Gate: when unpatched → responds to bus triggers [1016]
- Gate: when patch lead inserted → overrides bus trigger [1016]
- Manual trigger: when used with Gate input → both work independently [1016]
- Sustain: when set to 8.5 → original Model D behaviour [1016]
- Output jumper: when fitted → output reduced 30% [1016]

## Sources

- [1016] AJH Synth MiniMod Dual Contour product/manual page (product_page): http://ajhsynth.com/Contour.html

Full record as JSON: https://eurorackref.com/ajh-synth/minimod-dual-contour.json
