# Gemini 2412 SVF (AJH Synth)

Canonical page: https://eurorackref.com/ajh-synth/gemini-2412-svf/

- id: `ajh-synth/gemini-2412-svf`
- width: 28 HP; depth: 24 mm
- power: +12 V 50 mA, −12 V 45 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Multimode Filter, Simultaneous Multimode Outputs, Self-Oscillating Filter, 1V/Oct Pitch Tracking, Crossfader, Attenuverter / Offset, Distortion / Saturation, Formant / Vocal / Comb Filter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN 1 | audio | audio input | not stated | unknown | — | 749 |
| FCV 1 | cv | frequency CV | not stated | unknown | — | 749 |
| 1V/OCT 1 | cv, pitch | 1V/Octave frequency | not stated | unknown | — | 749 |
| Resonance CV 1 | cv | resonance CV | not stated | unknown | — | 749 |
| IN 2 | audio | audio input | not stated | unknown | — | 749 |
| FCV 2 | cv | frequency CV | not stated | unknown | — | 749 |
| 1V/OCT 2 | cv, pitch | 1V/Octave frequency | not stated | unknown | — | 749 |
| Resonance CV 2 | cv | resonance CV | not stated | unknown | — | 749 |
| MIX CV | cv | audio crossfade CV | 0 to 5 V | unipolar | — | 749 |
| D-FCV | cv | dual frequency CV | not stated | unknown | internal voltage | 749 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| LP 1 | audio | low pass output | not stated | unknown | VCF 1 | 749 |
| BP 1 | audio | band pass output | not stated | unknown | VCF 1 | 749 |
| HP 1 | audio | high pass output | not stated | unknown | VCF 1 | 749 |
| OUT 1 | audio | selected filter output | not stated | unknown | VCF 1 | 749 |
| LP 2 | audio | low pass output | not stated | unknown | VCF 2 | 749 |
| BP 2 | audio | band pass output | not stated | unknown | VCF 2 | 749 |
| HP 2 | audio | high pass output | not stated | unknown | VCF 2 | 749 |
| OUT 2 | audio | selected filter output | not stated | unknown | VCF 2 | 749 |
| D-OUT | audio | crossfader output | not stated | unknown | Crossfader | 749 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| FREQ 1 | knob | cutoff frequency | — | VCF 1 | 749 |
| Resonance 1 | knob | resonance | — | VCF 1 | 749 |
| FCV 1 | knob | FCV attenuverter | — | FCV 1, VCF 1 | 749 |
| IN 1 | knob | input level / overdrive | — | IN 1, VCF 1 | 749 |
| Mode switch 1 | switch | output filter type | — | OUT 1, Central mixing bus | 749 |
| VARY 1 | knob | LP-notch-HP sweep | — | OUT 1 | 749 |
| Self oscillation jumper 1 | jumper | enable self oscillation | — | VCF 1 | 749 |
| FREQ 2 | knob | cutoff frequency | — | VCF 2 | 749 |
| Resonance 2 | knob | resonance | — | VCF 2 | 749 |
| FCV 2 | knob | FCV attenuverter | — | FCV 2, VCF 2 | 749 |
| IN 2 | knob | input level / overdrive | — | IN 2, VCF 2 | 749 |
| Mode switch 2 | switch | output filter type | — | OUT 2, Central mixing bus | 749 |
| VARY 2 | knob | LP-notch-HP sweep | — | OUT 2 | 749 |
| Self oscillation jumper 2 | jumper | enable self oscillation | — | VCF 2 | 749 |
| AUDIO MIX | knob | VCF1/VCF2 crossfade | — | Crossfader, D-OUT | 749 |
| D-FCV | knob | dual frequency CV level | — | D-FCV, VCF 1, VCF 2 | 749 |
| D-FCV MIX | knob | D-FCV split VCF1/VCF2 | — | Dual frequency control, VCF 1, VCF 2 | 749 |
| Mode toggle | switch | dual mode select | — | Central mixing bus, VCF 2 | 749 |
| INVERT | switch | VCF2 polarity | — | Crossfader | 749 |

## Modes

- Serial (Cascade) (Mode toggle = CASCADE) [749]
- Parallel (Dual) (INVERT = VCF2) [749]
- INVERTED Parallel (INVERT = INVERT) [749]
- Self oscillation (Self oscillation jumper 1 = fitted/selected) [749]
- Overdrive [749]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| VCF 1 | slope | 12 dB/oct | — | 749 |
| VCF 2 | slope | 12 dB/oct | — | 749 |
| VCF 1 + VCF 2 | slope | 24 dB/oct | Cascade mode, both LP | 749 |
| BP response | slope | 6 dB/oct | single filter BP | 749 |
| BP response | slope | 12 dB/oct | Cascade LP into HP | 749 |
| VCF 1 | 1V/Oct tracking range | 4 octaves | self oscillation | 749 |
| MIX CV | control range | 0 to 5 V | — | 749 |
| IN level | clean range maximum | 8 dial position | — | 749 |
| module | width | 28 hp | — | 749 |

## Behavior

- FCV knob: when centre (12 o'clock) → no modulation applied [749]
- FCV knob: when clockwise of centre → increasing positive modulation [749]
- FCV knob: when anticlockwise of centre → inverted modulation applied [749]
- VARY: when knob at LP → low pass [749]
- VARY: when knob centred → notch [749]
- VARY: when knob at HP → high pass [749]
- D-FCV MIX: when centre position → equal CV both filters [749]
- D-FCV MIX: when fully anticlockwise → VCF1 frequency only [749]
- D-FCV MIX: when fully clockwise → VCF2 frequency only [749]
- D-FCV: when input unpatched → internal voltage, manual control [749]
- OUT 1: when Cascade mode → feeds IN 2 [749]
- AUDIO MIX: when Cascade, both filters LP → fades 12dB to 24dB [749]
- AUDIO MIX: when 12 o'clock → 50/50 VCF1/VCF2 mix [749]
- AUDIO MIX: when at VCF 1 position → only VCF 1 heard [749]
- AUDIO MIX: when at VCF 2 position → only VCF 2 heard [749]
- VCF 2: when INVERT switch at INVERT → inverted before crossfader [749]
- IN level: when above position 8 → overdrives filter core [749]
- filter output: when self oscillation selected → hotter than 10V p/p [749]
- VCF: when self oscillation jumper unselected → no self oscillation [749]

## Sources

- [749] AJH Synth Gemini 2412 SVF product page (product_page): https://ajhsynth.com/Gemini.html

Full record as JSON: https://eurorackref.com/ajh-synth/gemini-2412-svf.json
