# ADDAC508 Swell Physics (ADDAC System)

Canonical page: https://eurorackref.com/addac-system/addac-swell-physics/

- id: `addac-system/addac-swell-physics`
- width: 10 HP; depth: 45 mm
- power: +12 V 70 mA, −12 V 40 mA, +5 V ? mA
- status: current
- functions: Chaotic / Complex Modulation, Logic Gates, Unipolar/bipolar switch

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV IN | cv | offset or gain CV | not stated | unknown | not stated | 1143 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUTPUT 1 | cv | buoy 1 height | -5 to 10 V | unknown | Gerstner wave, Output scaling, Clipping | 1143 |
| OUTPUT 2 | cv | buoy 2 height | -5 to 10 V | unknown | Gerstner wave, Output scaling, Clipping | 1143 |
| OUTPUT 3 | cv | buoy 3 height | -5 to 10 V | unknown | Gerstner wave, Output scaling, Clipping | 1143 |
| OUTPUT 4 | cv | buoy 4 height | -5 to 10 V | unknown | Gerstner wave, Output scaling, Clipping | 1143 |
| AVERAGE OUTPUT | cv | average of outputs 1-4 | not stated | unknown | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4 | 1143 |
| GATE 1<2 | gate | gate while 1<2 | 0 to 5 V | unipolar | Gates | 1143 |
| GATE 3>4 | gate | gate while 3>4 | 0 to 5 V | unipolar | Gates | 1143 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| SWELL SIZE | knob | virtual swell height | — | Gerstner wave, Clipping | 1143 |
| AGITATION | knob | wind / secondary swells | — | Gerstner wave | 1143 |
| SPREAD | knob | distance between buoys | — | Gerstner wave | 1143 |
| SIMULATION SPEED | knob | simulation speed | — | Gerstner wave | 1143 |
| OFFSET | knob | output offset | — | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4 | 1143 |
| OUTPUT GAIN | knob | output gain | — | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4 | 1143 |
| CV IN switch | switch | route CV IN | — | CV IN, OFFSET, OUTPUT GAIN | 1143 |
| BIPOLAR / POSITIVE | switch | output voltage range | — | OUTPUT 1, OUTPUT 2, OUTPUT 3, OUTPUT 4 | 1143 |
| A / B MODE | switch | operation mode | — | Gerstner wave, Clipping | 1143 |

## Modes

- A-Scrolling (A / B MODE = A) [1143]
- B-Evolving (A / B MODE = B) [1143]
- Bipolar (BIPOLAR / POSITIVE = BIPOLAR) [1143]
- Positive (BIPOLAR / POSITIVE = POSITIVE) [1143]
- Fold [1143]
- Thru [1143]
- Limit [1143]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 10 HP | — | 1143 |
| module | depth | 4.5 cm | — | 1143 |
| module | current +12V | 70 mA | user's guide | 1143 |
| module | current +12V | 160 mA | product page | 1144 |
| module | current -12V | 40 mA | — | 1143 |
| outputs | voltage range | -5 to 5 V | Bipolar | 1143 |
| outputs | voltage range | 0 to 10 V | Positive | 1143 |
| outputs | resolution | 16 bit | — | 1143 |
| gates | gate high level | 5 V | — | 1143 |
| clipping mode switch | flick time | ≤ 0.5 s | — | 1143 |
| buoys | count | 4 count | — | 1143 |
| clipping modes | count | 3 count | — | 1143 |

## Behavior

- SPREAD: when mode A → works as delay (A-Scrolling) [1143]
- buoys: when mode A → follow same path (A-Scrolling) [1143]
- buoys: when mode B → different related paths (B-Evolving) [1143]
- outputs: when SWELL SIZE fully CCW, Bipolar → all output 0V (Bipolar) [1143]
- outputs: when SWELL SIZE fully CCW, Positive → all output +5V (Positive) [1143]
- waveform: when SWELL SIZE above 12 o'clock → clipping applied [1143]
- clipping: when default → Fold [1143]
- clipping: when Fold mode → folds back at range limit (Fold) [1143]
- clipping: when Thru mode → wraps to opposite end (Thru) [1143]
- clipping: when Limit mode → limits to range (Limit) [1143]
- GATE 1<2: when output 1 below output 2 → gate high +5V [1143]
- GATE 3>4: when output 3 above output 4 → gate high +5V [1143]
- outputs: when smaller SPREAD → outputs more related [1143]
- outputs: when bigger SPREAD → outputs more unrelated [1143]
- surface: when SWELL SIZE / AGITATION increased → surface more complex [1143]

## Sources

- [1143] ADDAC508 Swell Physics User's Guide (REV01, January 2024) (manual): https://www.addacsystem.com/contents/productdownload/ADDAC508_SwellPhysics_A_1-compressed.pdf
- [1144] ADDAC508 Swell Physics product page (product_page): https://www.addacsystem.com/en/products/modules/addac500-series/addac508

Full record as JSON: https://eurorackref.com/addac-system/addac-swell-physics.json
