# ADDAC503 Marble Physics (ADDAC System)

Canonical page: https://eurorackref.com/addac-system/addac-marble-physics/

- id: `addac-system/addac-marble-physics`
- width: 10 HP; depth: 52 mm
- power: +12 V 80 mA, −12 V 40 mA, +5 V ? mA
- status: current
- functions: Chaotic / Complex Modulation, Unipolar/bipolar switch

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| X OUT | cv | marble X position/velocity | -5 to 5 V | unknown | Physics simulator | 1145 |
| Y OUT | cv | marble Y position/velocity | -5 to 5 V | unknown | Physics simulator | 1145 |
| BOUNCE OUT | trigger | wall hit trigger | not stated | unknown | Physics simulator | 1145 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| X tilt | other | tilt plane X | — | Physics simulator | 1145 |
| Y tilt | other | tilt plane Y | — | Physics simulator | 1145 |
| Elasticity | other | wall elasticity | — | Physics simulator | 1145 |
| Simulation speed | other | overall simulation speed | — | Physics simulator | 1145 |
| Bump strength | other | bump strength | — | Bump | 1145 |
| Bump | button | physical push trigger | — | Physics simulator | 1145 |
| X axis lock | other | one-dimension simulation | — | Physics simulator, X OUT | 1145 |
| Uni/bipolar | other | output polarity | — | X OUT, Y OUT | 1145 |
| Position/velocity | other | output position or velocity | — | X OUT, Y OUT | 1145 |

## Modes

- Unipolar (Uni/bipolar = unipolar) [1145]
- Bipolar (Uni/bipolar = bipolar) [1145]
- X axis lock (X axis lock = on) [1145]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 10 HP | — | 1145 |
| module | depth | 5.2 cm | — | 1145 |
| module | max current | 150 mA | — | 1145 |
| CV inputs | input range | -10 to 10 V | — | 1145 |
| CV outputs | output range | -5 to 5 V | — | 1145 |

## Behavior

- BOUNCE OUT: when marble hits wall → fires trigger [1145]
- simulation: when X axis locked → one dimension simulation [1145]
- marble: when bump triggered → pushed with set strength [1145]
- marble: when plane tilted → rolls under gravity [1145]

## Sources

- [1145] ADDAC503 Marble Physics product page (product_page): https://www.addacsystem.com/en/products/modules/addac500-series/addac503

Full record as JSON: https://eurorackref.com/addac-system/addac-marble-physics.json
