# Ripsaw (Acid Rain Technology)

Canonical page: https://eurorackref.com/acid-rain-technology/ripsaw/

- id: `acid-rain-technology/ripsaw`
- width: 6 HP; depth: 25 mm
- power: +12 V 42 mA, −12 V 5 mA, +5 V 0 mA
- status: current
- functions: Digital / Wavetable Oscillator, Waveshape Morphing, 1V/Oct Pitch Tracking, Polyphonic Operation, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Shape CV | cv | shape CV offset | -5 to 5 V | bipolar | — | 1097 |
| Spread CV | cv | spread CV offset | -5 to 5 V | bipolar | — | 1097 |
| Shift CV | cv | shift CV offset | -5 to 5 V | bipolar | — | 1097 |
| v/o1 | pitch | voice pitch CV | -5 to 7 V | unknown | — | 1097 |
| v/o2 | pitch | voice pitch CV | -5 to 7 V | unknown | — | 1097 |
| v/o3 | pitch | voice pitch CV | -5 to 7 V | unknown | — | 1097 |
| v/o4 | pitch | voice pitch CV | -5 to 7 V | unknown | — | 1097 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out L | audio | left audio output | -6 to 6 V | not stated | Voice 1, Voice 2, Voice 3, Voice 4 | 1097 |
| Out R | audio | right audio output | -6 to 6 V | not stated | Voice 1, Voice 2, Voice 3, Voice 4 | 1097 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Encoder | other | root pitch | — | Voice 1, Voice 2, Voice 3, Voice 4 | 1097 |
| Shape | knob | saw-square morph | — | Voice 1, Voice 2, Voice 3, Voice 4 | 1097 |
| Spread | knob | detune of 7 oscillators | — | Voice 1, Voice 2, Voice 3, Voice 4 | 1097 |
| Shift | knob | hard sync oscillator pitch | — | hard sync oscillators | 1097 |

## Modes

- fine tune [1097]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| voices | count | 4 voices | — | 1097 |
| voice | waveforms per voice | 7 oscillators | — | 1097 |
| hard sync oscillators | count | 28 oscillators | — | 1097 |
| fine tune | range | 0 to 99 cents | — | 1097 |
| root reset | pitch | 65.41 Hz | C2 | 1097 |
| output pitch | range | 16.352 to 2093 Hz | C0 to C7 | 1097 |
| v/o inputs | calibrated range | -5 to 7 V | — | 1097 |
| CV and pitch inputs | reliable bandwidth | 500 Hz | — | 1097 |
| Out L/R | output level | 4 to 12 Vpp | depends on settings, voice count | 1097 |
| module | width | 6 HP | — | 1097 |
| module | depth | 25 mm | — | 1097 |
| module | +12V current | 42 mA | — | 1097 |
| module | -12V current | 5 mA | — | 1097 |
| module | +5V current | 0 mA | — | 1097 |

## Behavior

- voices: when no v/o patched → only Voice 1 heard [1097]
- Voice 2-4: when v/o jack patched → voice activated [1097]
- pitch: when outside C0–C7 → clipped at limits [1097]
- CV inputs: when above about 500 Hz → unpredictable, noisy [1097]
- Encoder: when long press → root returns to C2 [1097]
- Out L/R: when more voices active → volume compensated [1097]

## Sources

- [1097] Acid Rain Ripsaw Manual (manual): https://acidraintechnology.com/pages/ripsaw-manual
- [1098] Acid Rain Ripsaw product page (product_page): https://acidraintechnology.com/products/ripsaw

Full record as JSON: https://eurorackref.com/acid-rain-technology/ripsaw.json
