# Shifting Inverting Signal Mingler (4ms)

Canonical page: https://eurorackref.com/4ms/shifting-inverting-signal-mingler/

- id: `4ms/shifting-inverting-signal-mingler`
- width: 12 HP; depth: 22 mm
- power: +12 V 51 mA, −12 V 51 mA, +5 V 0 mA
- status: current
- functions: Attenuverter / Offset, Mixer, Voltage Math / Precision Adder

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN 1 | audio, cv | channel input | not stated | unknown | — | 1564 |
| IN 2 | audio, cv | channel input | not stated | unknown | IN 1 | 1564 |
| IN 3 | audio, cv | channel input | not stated | unknown | — | 1564 |
| IN 4 | audio, cv | channel input | not stated | unknown | IN 3 | 1564 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT 1 | audio, cv | scaled shifted output | -11.4 to 11.4 V | bipolar | Channel 1 | 1564 |
| OUT 2 | audio, cv | scaled shifted output | -11.4 to 11.4 V | bipolar | Channel 2 | 1564 |
| OUT 3 | audio, cv | scaled shifted output | -11.4 to 11.4 V | bipolar | Channel 3 | 1564 |
| OUT 4 | audio, cv | scaled shifted output | -11.4 to 11.4 V | bipolar | Channel 4 | 1564 |
| MIX | audio, cv | sum of all channels | -11.4 to 11.4 V | bipolar | Mix | 1564 |
| MIX (SW) | audio, cv | sum of unpatched-OUT channels | -11.4 to 11.4 V | bipolar | Switched Mix | 1564 |
| + SLICE | audio, cv | positive portion of mix | not stated | unipolar | Slicer | 1564 |
| - SLICE | audio, cv | negative portion of mix | not stated | unipolar | Slicer | 1564 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| SCALE 1 | knob | gain, attenuation, inversion | -1 to 1 x | Channel 1, OUT 1, MIX | 1564 |
| SHIFT 1 | knob | DC offset | -9.5 to 9.5 V | Channel 1, OUT 1, MIX | 1564 |
| SCALE POTS 1 | jumper | SCALE knob range | — | SCALE 1 | 1564 |
| SCALE 2 | knob | gain, attenuation, inversion | -1 to 1 x | Channel 2, OUT 2, MIX | 1564 |
| SHIFT 2 | knob | DC offset | -9.5 to 9.5 V | Channel 2, OUT 2, MIX | 1564 |
| SCALE POTS 2 | jumper | SCALE knob range | — | SCALE 2 | 1564 |
| SCALE 3 | knob | gain, attenuation, inversion | -1 to 1 x | Channel 3, OUT 3, MIX | 1564 |
| SHIFT 3 | knob | DC offset | -9.5 to 9.5 V | Channel 3, OUT 3, MIX | 1564 |
| SCALE POTS 3 | jumper | SCALE knob range | — | SCALE 3 | 1564 |
| SCALE 4 | knob | gain, attenuation, inversion | -1 to 1 x | Channel 4, OUT 4, MIX | 1564 |
| SHIFT 4 | knob | DC offset | -9.5 to 9.5 V | Channel 4, OUT 4, MIX | 1564 |
| SCALE POTS 4 | jumper | SCALE knob range | — | SCALE 4 | 1564 |
| LINK 1+2 | jumper | channel 1+2 normalization | — | IN 2, Channel 2 | 1564 |
| LINK 3+4 | jumper | channel 3+4 normalization | — | IN 4, Channel 4 | 1564 |

## Modes

- Bi-polar (SCALE POTS = jumper on) [1564]
- Uni-polar (SCALE POTS = jumper off) [1564]
- Boost (SCALE POTS = wire to ground) [1564]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 12 HP | — | 1564 |
| module | depth | 22 mm | maximum, with power cable | 1564 |
| module | +12V current | 51 mA | — | 1564 |
| module | -12V current | 51 mA | — | 1564 |
| module | +5V current | 0 mA | — | 1564 |
| SHIFT | offset range | -9.5 to 9.5 V | — | 1564 |
| SHIFT | offset range | -9 to 9 V | product page figure | 1368 |
| SCALE | gain range | -1 to 1 x | Bi-polar | 1564 |
| SCALE | gain range | 0 to 1 x | Uni-polar | 1564 |
| SCALE | gain range | 0 to 2 x | Boost | 1564 |
| SCALE | center gain | 1 x | Boost | 1564 |
| module | output range | -11.4 to 11.4 V | — | 1564 |
| + SLICE | slice threshold | -250 mV | — | 1564 |
| - SLICE | slice threshold | 250 mV | — | 1564 |
| PAD B/O | pad attenuation | -3.5 dB | 100k resistor | 1564 |
| PAD B/O | pad attenuation | -8 dB | 33k resistor | 1564 |
| PAD B/O | pad attenuation | -15 dB | 10k resistor | 1564 |
| PAD B/O | pad attenuation | -21 dB | 4k7 resistor | 1564 |

## Behavior

- IN 2: when unpatched, LINK 1+2 on → copies IN 1 [1564]
- IN 4: when unpatched, LINK 3+4 on → copies IN 3 [1564]
- IN 2: when patched → LINK 1+2 disabled [1564]
- IN 4: when patched → LINK 3+4 disabled [1564]
- channel: when no input → SHIFT sets steady DC [1564]
- SHIFT: when knob centered → no offset added [1564]
- SCALE: when knob centered → zero output (Bi-polar) [1564]
- SCALE: when fully counter-clockwise → inverted unity gain (Bi-polar) [1564]
- SCALE: when fully clockwise → unity gain (Bi-polar) [1564]
- SCALE: when fully down → silent (Uni-polar) [1564]
- SCALE: when fully clockwise → 2x gain (Boost) [1564]
- outputs: when beyond ±11.4V → clipped [1564]
- MIX (SW): when channel OUT patched → channel excluded [1564]
- + SLICE: when MIX above 0V → outputs signal [1564]
- - SLICE: when MIX below 0V → outputs signal [1564]
- SLICE jacks: when near 0V → both output (overlap) [1564]
- INS header: when input jack patched → header overridden, that channel [1564]
- INS header: when LINK jumpers installed → channel pairs summed [1564]
- SHIFT: when applied after SCALE → offset post-gain [1564]

## Sources

- [1368] 4ms Shifting Inverting Signal Mingler product page (product_page): https://4mscompany.com/p.php?p=679
- [1564] 4ms Shifting Inverting Signal Mingler manual v1 (manual): https://4mscompany.com/SISM/SISM-manual-v1.pdf

Full record as JSON: https://eurorackref.com/4ms/shifting-inverting-signal-mingler.json
