# Quad Pingable LFO (4ms)

Canonical page: https://eurorackref.com/4ms/quad-pingable-lfo/

- id: `4ms/quad-pingable-lfo`
- width: 12 HP; depth: 26 mm
- power: +12 V 86 mA, −12 V 37 mA, +5 V 65 mA
- status: current
- functions: LFO, Tempo / Clock Sync, Master Clock, ADSR Envelope, Unipolar/bipolar switch

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Ping 1 | clock, trigger | sets tempo (external clock) | not stated | unknown | PING header channel 1 | 379 |
| Reset 1 | trigger, gate | restarts LFO (rising edge) | not stated | unknown | — | 379 |
| Skew CV 1 | cv | waveshape (rise/fall ratio) | 0 to 10 V | unipolar | — | 379 |
| Ping 2 | clock, trigger | sets tempo (external clock) | not stated | unknown | PING header channel 2 | 379 |
| Reset 2 | trigger, gate | restarts LFO (rising edge) | not stated | unknown | — | 379 |
| Skew CV 2 | cv | waveshape (rise/fall ratio) | 0 to 10 V | unipolar | — | 379 |
| Ping 3 | clock, trigger | sets tempo (external clock) | not stated | unknown | PING header channel 3 | 379 |
| Reset 3 | trigger, gate | restarts LFO (rising edge) | not stated | unknown | — | 379 |
| Skew CV 3 | cv | waveshape (rise/fall ratio) | 0 to 10 V | unipolar | — | 379 |
| Ping 4 | clock, trigger | sets tempo (external clock) | not stated | unknown | PING header channel 4 | 379 |
| Reset 4 | trigger, gate | restarts LFO (rising edge) | not stated | unknown | — | 379 |
| Skew CV 4 | cv | waveshape (rise/fall ratio) | 0 to 10 V | unipolar | — | 379 |
| PING header | clock | ping normalization header | not stated | unknown | — | 379 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT 1 | cv | LFO output | -5 to 10 V | unknown | LFO 1 | 379 |
| OUT 2 | cv | LFO output | -5 to 10 V | unknown | LFO 2 | 379 |
| OUT 3 | cv | LFO output | -5 to 10 V | unknown | LFO 3 | 379 |
| OUT 4 | cv | LFO output | -5 to 10 V | unknown | LFO 4 | 379 |
| OUTS header | cv | LFO signals header | 0 to 10 V | unknown | LFO 1, LFO 2, LFO 3, LFO 4 | 379 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Ping button 1 | button | tap tempo | — | LFO 1 | 379 |
| On button 1 | button | on/mute (latching) | — | OUT 1 | 379 |
| Skew 1 | knob | waveshape, offsets Skew CV | 0 to 100 % | LFO 1 | 379 |
| Fire-on-unmute jumper 1 | jumper | reset on unmute | — | LFO 1 | 379 |
| Ping button 2 | button | tap tempo | — | LFO 2 | 379 |
| On button 2 | button | on/mute (latching) | — | OUT 2 | 379 |
| Skew 2 | knob | waveshape, offsets Skew CV | 0 to 100 % | LFO 2 | 379 |
| Fire-on-unmute jumper 2 | jumper | reset on unmute | — | LFO 2 | 379 |
| Ping button 3 | button | tap tempo | — | LFO 3 | 379 |
| On button 3 | button | on/mute (latching) | — | OUT 3 | 379 |
| Skew 3 | knob | waveshape, offsets Skew CV | 0 to 100 % | LFO 3 | 379 |
| Fire-on-unmute jumper 3 | jumper | reset on unmute | — | LFO 3 | 379 |
| Ping button 4 | button | tap tempo | — | LFO 4 | 379 |
| On button 4 | button | on/mute (latching) | — | OUT 4 | 379 |
| Skew 4 | knob | waveshape, offsets Skew CV | 0 to 100 % | LFO 4 | 379 |
| Fire-on-unmute jumper 4 | jumper | reset on unmute | — | LFO 4 | 379 |
| Bipolar/Unipolar jumper | jumper | output range, all channels | — | OUT 1, OUT 2, OUT 3, OUT 4 | 379 |
| Threshold trimpot | other | Ping/Reset comparator threshold | 0 to 5 V | Ping 1, Ping 2, Ping 3, Ping 4, Reset 1, Reset 2, Reset 3, Reset 4 | 379 |
| LED Dim trimpot | other | LED brightness | — | — | 379 |
| 5V source jumper | jumper | +5V source select | — | — | 380 |

## Modes

- Tap tempo [379]
- External ping [379]
- One-shot mode [379]
- Multi-shot mode [379]
- Floating Reset mode [379]
- Fire-on-unmute (Fire-on-unmute jumper = installed) [379]
- Unipolar (Bipolar/Unipolar jumper = UNI) [379]
- Bipolar (Bipolar/Unipolar jumper = BI) [379]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| LFO | slowest period | 71 min | — | 379 |
| LFO | slowest frequency | 0.0002 Hz | — | 379 |
| LFO | fastest frequency | 500 Hz | — | 379 |
| LFO | marginal tracking | ≤ 1000 Hz | — | 379 |
| Skew 0% | trigger pulse width | 10 ms | — | 379 |
| Skew | triangle CV | 5 V | about, 50% skew | 379 |
| Skew | ramp-up CV | 10 V | about, 100% skew | 379 |
| Skew CV | full range | 10 V | — | 379 |
| Skew | trigger setting | ≤ 200 mV | knob 7:00 | 379 |
| Skew | pluck setting | 500 mV | knob ~7:35 | 379 |
| OUT | unipolar range | 0 to 10 V | — | 379 |
| OUT | bipolar range | -5 to 5 V | — | 379 |
| Threshold trimpot | range | 0 to 5 V | — | 379 |
| Threshold trimpot | factory default | 2.5 V | — | 379 |
| Threshold trimpot | LZX setting | 0.8 V | — | 379 |
| Ping button | stop-clock hold | 2 s | — | 379 |
| module | width | 12 HP | — | 379 |
| module | depth with cable | 26.4 mm | manual | 379 |
| module | depth without cable | 21.6 mm | manual | 379 |
| module | depth | 40 mm | product page | 380 |
| power | -12V current | ≤ 37 mA | manual | 379 |
| power | -12V current | ≤ 73 mA | product page | 380 |
| power | +12V current | ≤ 89 mA | external 5V | 380 |
| power | +12V current | ≤ 154 mA | internal 5V | 380 |
| power | +5V current | ≤ 65 mA | external 5V | 380 |
| OUTS header | pins | 8 pins | — | 380 |
| PING header | pins | 8 pins | — | 379 |

## Behavior

- Ping jack: when signal recognized → tap tempo clock turned off [379]
- tap tempo: when new tempo tapped → tap tempo re-enabled [379]
- Ping jack: when nothing plugged in → PING header clocks channel [379]
- external clock: when clock stops → output stops, timing remembered [379]
- Reset: when trigger received → LFO restarts, tempo unchanged [379]
- Reset: when pulse while Skew modulated → forces reset [379]
- Reset: when gate held high → Floating Reset: no re-sync (Floating Reset mode) [379]
- Reset: when pulse, clock stopped, unmuted → fires one-shot (One-shot mode) [379]
- Reset: when clock into Reset, armed → shape length from ping (Multi-shot mode) [379]
- output: when power-up without reset → starts on ping [379]
- output: when no Skew modulation → auto-resets on ping/lock point [379]
- auto re-sync: when Skew actively modulated → suspended until Skew steady [379]
- Reset Lock Point: when ping slower → same absolute delay kept [379]
- Reset Lock Point: when ping faster than offset → cleared to 0ms [379]
- On button: when jumper installed, turned on → fires reset pulse [379]
- On button: when jumper absent, turned on → unmutes without reset [379]
- Threshold trimpot: when fully CW (0V) → no Ping/Reset response [379]
- Floating Reset: when ping clock stops → output still stops [379]
- Skew: when just above 0% → near-exponential pluck [379]

## Sources

- [379] Quad Pingable LFO User Manual (manual): https://4mscompany.com/QPLFO/QPLFO_manual_2016-03-04.pdf
- [380] 4ms Company Quad Pingable LFO product page (product_page): https://4mscompany.com/p.php?p=600

Full record as JSON: https://eurorackref.com/4ms/quad-pingable-lfo.json
