# EnvVCA (4ms)

Canonical page: https://eurorackref.com/4ms/envvca/

- id: `4ms/envvca`
- width: 8 HP; depth: 24 mm
- power: +12 V 85 mA, −12 V 85 mA, +5 V ? mA
- status: current
- functions: Function Generator, ADSR Envelope, Looping / Cycling Envelope, LFO, Slew Limiter, VCA, End-of-Cycle / End-of-Rise Output

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Trigger | trigger, gate | fires one-shot envelope | unknown | unknown | — | 1343 |
| Follow | cv, gate, audio | slew limiter input | 0 to 5 V | unipolar | — | 1343 |
| Time CV | cv | rise/fall time CV | not stated | unknown | — | 1343 |
| Audio In | audio, cv | VCA input | -10 to 10 V | unknown | — | 1343 |
| Cycle | gate | toggles cycling | unknown | unknown | — | 1343 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Env | cv, audio | envelope output | 0 to 10 V | unipolar | Envelope | 1343 |
| Audio Out | audio, cv | VCA output | -10 to 10 V | unknown | VCA | 1343 |
| EOR | gate | end of rise gate | 0 to 5 V | unknown | Envelope | 1343 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Rise | fader | rise time | — | Envelope | 1343 |
| Fall | fader | fall time | — | Envelope | 1343 |
| Rise switch | switch | rise time range | — | Rise, Envelope | 1343 |
| Fall switch | switch | fall time range | — | Fall, Envelope | 1343 |
| Rise CV | knob | Time CV to rise | — | Envelope, Time CV | 1343 |
| Fall CV | knob | Time CV to fall | — | Envelope, Time CV | 1343 |
| Cycle button | button | toggles cycling (latching) | — | Envelope | 1343 |
| RETRIG jumper | jumper | retrigger during rise | — | Envelope | 1343 |
| Env. Level | fader | Env jack level | 0 to 10 V | Env | 1343 |
| VCA Min Gain trim | other | minimum VCA gain | -90 to -30 dB | VCA | 1343 |

## Modes

- Cycle (Cycle button = on) [1343]
- Trigger [1343]
- Follow [1343]
- RETRIG (RETRIG jumper = installed) [1343]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1343 |
| module | depth | 24 mm | — | 1343 |
| module | +12V current | 85 mA | — | 1343 |
| module | -12V current | 85 mA | — | 1343 |
| power | +12V current (product page) | 83 mA | — | 1344 |
| power | -12V current (product page) | 81 mA | — | 1344 |
| VCA | gain range | -90 to 0.9 dB | — | 1343 |
| VCA | frequency response | 0 to 20000 Hz | +/-0.1dB | 1343 |
| Audio In/Out | range without clipping | -10 to 10 V | — | 1343 |
| Audio In | input impedance | 100 kOhm | — | 1343 |
| Audio Out | output impedance | 1 kOhm | — | 1343 |
| Trigger | rising edge threshold | 2.5 V | — | 1343 |
| Cycle | rising edge threshold | 2.5 V | — | 1343 |
| Follow | active range | 0 to 5 V | — | 1343 |
| internal envelope | range | 0 to 5 V | — | 1343 |
| Env output driver | gain | 2 x | — | 1343 |
| VCA Min Gain trim | attenuation | -90 dB | fully CCW | 1343 |
| VCA Min Gain trim | attenuation | -80 dB | middle (factory default) | 1343 |
| VCA Min Gain trim | attenuation | -30 dB | fully CW | 1343 |
| Slider range | total env time | 1.5 to 300 s | Slow switch | 1343 |
| Slider range | slowest total env time | 20 s | Med switch | 1343 |
| Slider range | fastest frequency | 18 Hz | Med switch | 1343 |
| Slider range | frequency | 2.5 to 800 Hz | Fast switch | 1343 |
| Max range with CV | slowest total env time | 30 min | Slow switch | 1343 |
| Max range with CV | fastest frequency | 300 Hz | Slow switch | 1343 |
| Max range with CV | fastest frequency | 1000 Hz | Med switch | 1343 |
| Max range with CV | slowest total env time | 30 min | Med switch | 1343 |
| Max range with CV | slowest total env time | 30 min | Fast switch | 1343 |
| Max range with CV | fastest frequency | 10000 Hz | Fast switch | 1343 |
| Rise/Fall time | range with CV | 0.0001 to 1800 s | — | 1343 |
| Rise/Fall time | range, sliders only | 1.25 to 120000 ms | — | 1343 |
| Rise/Fall time | minimum | 62 us | manual spec | 1343 |
| Rise/Fall time | minimum | 50 us | product page spec | 1344 |
| Rise/Fall time | maximum | ≥ 150 s | typically 250-300 s | 1343 |
| Rise/Fall time | maximum | ≥ 10 min | typically 15-20 min | 1344 |
| Env | maximum | 9.5 V | — | 1343 |
| EOR | gate range | 0 to 5 V | — | 1343 |
| EOR | minimum stable pulse width | 1 ms | — | 1343 |

## Behavior

- Trigger: when no envelope running → starts single complete envelope [1343]
- Trigger: when arrives during rise → ignored (RETRIG off) [1343]
- Trigger: when arrives during fall → rises from current voltage (RETRIG off) [1343]
- Trigger: when RETRIG installed, any stage → jumps to 0V, rises [1343]
- Trigger: when pulse width varies → envelope unchanged; rising edge only [1343]
- Follow: when not triggered or cycling → envelope slews toward Follow voltage [1343]
- Follow: when voltage above envelope → envelope rises [1343]
- Follow: when voltage below envelope → envelope falls [1343]
- Follow: when gate held past peak → envelope sustains (ASR) [1343]
- Follow: when signal outside 0-5V → clipped [1343]
- Envelope: when rate of change → limited by Rise/Fall settings [1343]
- Cycle button: when pressed while envelope running → envelope finishes fall, stops [1343]
- Cycle button: when pressed → running envelope not reset [1343]
- Rise CV: when right of center, +CV → lengthens rise time [1343]
- Rise CV: when left of center, +CV → shortens rise time [1343]
- Rise CV: when centered → Time CV has no effect [1343]
- Fall CV: when right of center, +CV → lengthens fall time [1343]
- Fall CV: when left of center, +CV → shortens fall time [1343]
- Fall CV: when centered → Time CV has no effect [1343]
- Rise: when slider moved up → slower rise [1343]
- Fall: when slider moved up → slower fall [1343]
- Env. Level: when any setting → internal VCA envelope unaffected [1343]
- VCA: when envelope stopped or 0V → Audio Out silent [1343]
- VCA: when envelope at peak → unity with input [1343]
- Envelope: when switch positions with CV → little effect on range [1343]
- Cycle: when button off, gate high → cycles while gate high [1343]
- Cycle: when button on, gate high → cycling stops while high [1343]
- Cycle: when envelope running → jack/button changes ignored [1343]
- Cycle button: when cycling active → lights orange [1343]
- EOR: when rise stage ends → goes high [1343]
- EOR: when envelope completes → goes low [1343]
- EOR: when envelope not running → stays low [1343]
- Env. Level: when bottom position → Env outputs 0V [1343]
- Env. Level: when top position → envelope 0V to 10V [1343]
- VCA: when Env. Level moved → VCA unaffected (pre-slider) [1343]
- Env: when fall time > 11ms → minimum -5mV to +40mV [1343]
- Env: when fall time < 11ms → minimum -5mV to -1.2V [1343]
- VCA Min Gain trim: when set too quiet → longer gaps when cycling [1343]
- RETRIG jumper: when installed, used with audio → may click on VCA [1343]

## Sources

- [1343] 4ms EnvVCA manual (manual): https://4mscompany.com/media/ENVVCA/manual/EnvVCA-manual-v1.0.pdf
- [1344] 4ms EnvVCA product page (product_page): https://4mscompany.com/p.php?p=1038

Full record as JSON: https://eurorackref.com/4ms/envvca.json
