# Dual Looping Delay (4ms)

Canonical page: https://eurorackref.com/4ms/dual-looping-delay/

- id: `4ms/dual-looping-delay`
- width: 20 HP; depth: 25 mm
- power: +12 V 188 mA, −12 V 48 mA, +5 V 0 mA
- status: current
- functions: Delay, Audio Buffer Recording / Looper, Freeze / Hold, Reverse playback, Tempo / Clock Sync, Send / return, Master Clock, 1V/Oct Pitch Tracking, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| In A | audio | main audio input | not stated | unknown | not stated | 794 |
| Return A | audio | external feedback return | not stated | unknown | not stated | 794 |
| Time A CV | cv, pitch | delay time CV | -5 to 5 V | bipolar | not stated | 794 |
| Feedback A CV | cv | feedback amount CV | 0 to 5 V | unipolar | not stated | 794 |
| Delay Feed A CV | cv | record level CV | 0 to 5 V | unipolar | not stated | 794 |
| Reverse A | trigger, gate | toggles Reverse | not stated | unknown | not stated | 794 |
| Hold A | trigger, gate | toggles Infinite Hold | not stated | unknown | not stated | 794 |
| In B | audio | main audio input | not stated | unknown | In A | 794 |
| Return B | audio | external feedback return | not stated | unknown | not stated | 794 |
| Time B CV | cv, pitch | delay time CV | -5 to 5 V | bipolar | not stated | 794 |
| Feedback B CV | cv | feedback amount CV | 0 to 5 V | unipolar | not stated | 794 |
| Delay Feed B CV | cv | record level CV | 0 to 5 V | unipolar | not stated | 794 |
| Reverse B | trigger, gate | toggles Reverse | not stated | unknown | not stated | 794 |
| Hold B | trigger, gate | toggles Infinite Hold | not stated | unknown | not stated | 794 |
| Ping | clock | clock sync / beat | not stated | unknown | bus clock (RECV jumper) | 794 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out A | audio | dry/wet mix output | -10.5 to 10.5 V | unknown | Channel A, Channel B | 794 |
| Send A | audio | delay signal only | -10.5 to 10.5 V | unknown | Channel A | 794 |
| Loop A | clock, trigger, gate | loop time clock | 0 to 8.2 V | unknown | Channel A | 794 |
| Out B | audio | dry/wet mix output | -10.5 to 10.5 V | unknown | Channel B | 794 |
| Send B | audio | delay signal only | -10.5 to 10.5 V | unknown | Channel B | 794 |
| Loop B | clock, trigger, gate | loop time clock | 0 to 8.2 V | unknown | Channel B | 794 |
| Clock Out | clock, trigger, gate | master Ping clock | 0 to 8.2 V | unknown | Ping Clock | 794 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Time A Knob | knob | beats per loop | 1 to 16 beats | Channel A, Time A CV | 794 |
| Time A Switch | switch | Time range | — | Time A Knob, Channel A | 794 |
| Feedback A Knob | knob | feedback amount | 0 to 110 % | Channel A, Feedback A CV | 794 |
| Delay Feed A Knob | knob | record level | 0 to 100 % | Channel A, Delay Feed A CV, In A | 794 |
| Mix A Knob | knob | dry/wet mix | — | Out A, Channel A | 794 |
| Reverse A Button | button | toggles Reverse | — | Channel A | 794 |
| Infinite Hold A Button | button | toggles Infinite Hold | — | Channel A | 794 |
| Time B Knob | knob | beats per loop | 1 to 16 beats | Channel B, Time B CV | 794 |
| Time B Switch | switch | Time range | — | Time B Knob, Channel B | 794 |
| Feedback B Knob | knob | feedback amount | 0 to 110 % | Channel B, Feedback B CV | 794 |
| Delay Feed B Knob | knob | record level | 0 to 100 % | Channel B, Delay Feed B CV, In B | 794 |
| Mix B Knob | knob | dry/wet mix | — | Out B, Channel B | 794 |
| Reverse B Button | button | toggles Reverse | — | Channel B | 794 |
| Infinite Hold B Button | button | toggles Infinite Hold | — | Channel B | 794 |
| Ping Button | button | tap tempo | — | Ping Clock | 794 |
| Bus Clock Jumper | jumper | bus clock routing | — | Ping Clock, Ping | 794 |
| 24-bit Jumper | jumper | 24-bit storage mode | — | Channel A, Channel B | 794 |
| DC Coupling Jumpers | jumper | input AC/DC coupling | — | In A, In B, Return A, Return B | 794 |

## Modes

- Infinite Hold [794]
- Reverse [794]
- Quantized Time Mode [794]
- Unquantized Time Mode [794]
- Quantized Change Mode [794]
- Ping Lock [794]
- 24-bit Mode (24-bit Jumper = Installed) [794]
- System Settings Mode [794]
- Trigger mode [794]
- Gate mode [794]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Channel | max delay time | 174 s | 16-bit mode | 794 |
| Channel | max delay time | 87 s | 24-bit mode | 794 |
| Module | total time | 409.5 s | 16-bit, as printed (6m49.5s) | 794 |
| Module | sample rate | 48 kHz | — | 794 |
| Module | storage depth | 16 bit | default; 24 selectable | 794 |
| Module | processing depth | 32 bit | — | 794 |
| Module | memory | 256 Mbit | — | 794 |
| Feedback | range | 0 to 110 % | — | 794 |
| Time Knob | range | 1 to 16 beats | Time Switch center | 794 |
| Time Knob | range | 17 to 32 beats | Time Switch up | 794 |
| Time Knob | range | 0.125 to 2 beats | Time Switch down | 794 |
| Time CV | multiplier | 0.0625 to 16 x | Quantized Time Mode | 794 |
| Time CV | range | 5 octaves | Unquantized Time Mode | 794 |
| Time CV | tracking trim | 0.75 to 1.25 V/oct | — | 794 |
| Ping | external VCO tracking | ≤ 2000 Hz | — | 794 |
| Ping | multiplied tracking | ≤ 16000 Hz | — | 794 |
| Ping Clock | boot tempo | 150 BPM | 16-bit mode, approx | 794 |
| Reverse/Hold jacks | trigger threshold | 1.6 V | — | 794 |
| Audio inputs | bandwidth | 0 to 24000 Hz | — | 794 |
| Audio inputs | max level | 16.8 Vpp | AC coupled | 794 |
| Audio outputs | bandwidth | 0 to 24000 Hz | — | 794 |
| Audio outputs | max level diff | -1.7 dB | — | 794 |
| Audio outputs | max output | -10.5 to 10.5 V | — | 794 |
| Clock outputs | level | 0 to 8.2 V | — | 794 |
| Clock outputs | jitter | 2.4 µs | — | 794 |
| Clock outputs | rise/fall time | ≤ 1 µs | — | 794 |
| Clock outputs | pulse width | 22 ms | Trigger mode | 794 |
| Clock outputs | duty cycle | 50 % | Gate mode or >22Hz | 794 |
| Auto Mute | threshold | 5 mVpp | — | 794 |
| Auto Mute | attack/decay | 1 ms | — | 794 |
| Soft Clipping | onset | 75 % | of clipping point | 794 |
| Cross Fade Time | settings | 0 to 500 ms | 0, 8, 66, 200, 500 | 794 |
| Cross Fade Time | default | 8 ms | — | 794 |
| Runaway DC Block | HPF cutoff | 10 Hz | — | 794 |
| Jacks | tolerated input | -12 to 12 V | — | 794 |
| Module | width | 20 HP | — | 794 |
| Module | depth | 25 mm | — | 794 |
| Module | +12V current | 188 mA | — | 794 |
| Module | -12V current | 48 mA | — | 794 |

## Behavior

- In B: when unpatched → receives In A [794]
- Out A: when Out B unpatched → Channel B mixed in [794]
- Infinite Hold button: when released → toggles Infinite Hold [794]
- Reverse button: when released → toggles Reverse [794]
- Reverse button: when knob turned while held → Reverse cancelled [794]
- Channel: when Infinite Hold on → stops recording, loops memory [794]
- Feedback: when Infinite Hold on → no effect unless windowing [794]
- Delay Feed: when Infinite Hold on → no effect [794]
- Time: when Infinite Hold on → changes loop start point [794]
- Reverse: when Infinite Hold off → swaps read/write, reverses direction [794]
- Reverse: when Infinite Hold on → plays loop backwards [794]
- Time CV: when 0V or unpatched → no effect (x1) [794]
- Time CV: when Quantized, positive CV → delay time longer [794]
- Time CV: when Unquantized, each +1V → time period halves [794]
- Time CV: when Time Switch up → 1V/oct response altered [794]
- Feedback: when knob 0%, CV ≥5V → exactly 100% [794]
- Feedback: when knob + CV combined → max 110% [794]
- Delay Feed: when knob + CV combined → max 100% [794]
- Feedback: when 100% → echoes never fade [794]
- Feedback: when 110% → echoes grow louder [794]
- Windowing: when Infinite Hold off → not available [794]
- Windowing: when one full Feedback turn → shifts one loop length [794]
- Clock outputs: when Infinite Hold, loop start → clock goes high [794]
- Clock outputs: when faster than 22Hz → 50% duty cycle [794]
- Ping: when tapped or clock changed → both channels retime proportionally [794]
- Ping: when external clock patched → beat = last two pulses [794]
- Ping: when RECV jumper, Ping patched → bus clock disconnected [794]
- Ping Button: when receiving bus clock → tap disabled [794]
- Ping Lock: when enabled → channel uses locked Ping time [794]
- Quantized Change Mode: when Time/Reverse/Hold changed → waits for next Ping [794]
- Reverse/Hold jacks: when Gate mode → state follows gate [794]
- Button: when Gate mode pressed → inverts gate sense [794]
- Cross fade: when loop shorter than CFT → crossfading disabled [794]
- Infinite Hold: when exited (v5) → plays through, no restart [794]
- Auto Mute: when input below 5mVpp → input silenced [794]
- Soft Clipping: when output over 75% → limiting applied [794]
- 24-bit Mode: when jumper installed at power-up → half time, half tempo [794]
- System Settings: when center/center entered → Delay Feed 100%, Unquantized [794]
- Settings: when buttons tapped under 2s → changes not saved [794]
- Calibration sector: when erased → auto-recalibrates on boot [794]
- Send: when first echo → not through FX loop [794]

## Sources

- [794] 4ms Company Dual Looping Delay Manual (manual): http://4mscompany.com/DLD/manual/DLD-manual-1.1c-v5.pdf
- [795] 4ms Company Dual Looping Delay product page (product_page): https://4mscompany.com/p.php?p=709

Full record as JSON: https://eurorackref.com/4ms/dual-looping-delay.json
