# Seq (2hp)

Canonical page: https://eurorackref.com/2hp/seq/

- id: `2hp/seq`
- width: 2 HP; depth: 47 mm
- power: +12 V 54 mA, −12 V 3 mA, +5 V ? mA
- status: current
- functions: Step Sequencer, Quantizer, Slew Limiter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CLOCK | clock | advance one step | not stated | unknown | — | 1416 |
| RESET | gate, trigger | return to sequence start | not stated | unknown | — | 1416 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT | cv, pitch | sequence output | 0 to 5 V | unipolar | sequencer, quantizer, glide | 1416 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| PLAY | switch | play/tune mode | — | sequencer, LENGTH, MODE | 1416 |
| SETTINGS | switch | changes knob functions | — | LENGTH, MODE | 1416 |
| LENGTH | knob | sequence length | 1 to 16 steps | sequencer, quantizer | 1416 |
| MODE | knob | run mode | — | sequencer, glide | 1416 |

## Modes

- Play (PLAY = left) [1416]
- Tune (PLAY = right) [1416]
- Forward [1416]
- Backward [1416]
- Pendulum [1416]
- Random [1416]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 2 HP | — | 1416 |
| module | depth | 47 mm | — | 1416 |
| module | +12V current | 54 mA | — | 1416 |
| module | -12V current | 3 mA | — | 1416 |
| module | depth | 45 mm | product page figure | 1417 |
| sequence | length | 1 to 16 steps | — | 1416 |
| OUT | range | 0 to 5 V | — | 1416 |
| CLOCK | threshold | 2.5 V | — | 1416 |
| RESET | threshold | 2.5 V | — | 1416 |
| quantizer | preset scales | 8 scales | — | 1416 |
| LEDs | display | 8 LEDs | — | 1416 |

## Behavior

- sequence: when PLAY left, clock pulse → advances one step [1416]
- sequence: when PLAY right → pauses on current step [1416]
- Tune mode: when PLAY right → active regardless of SETTINGS [1416]
- RESET: when gate/trigger received → playback to sequence start [1416]
- LEDs: when LENGTH set → LEDs show last step (Play) [1416]
- LENGTH: when far right, SETTINGS right → output unquantized (Play) [1416]
- glide: when MODE far left, SETTINGS right → no glide (Play) [1416]
- glide: when MODE far right, SETTINGS right → maximum transition time (Play) [1416]
- knob settings: when either toggle changes → saved between power cycles [1416]
- MODE: when PLAY right → sets selected step value (Tune) [1416]

## Sources

- [1416] 2hp Seq manual (manual): https://www.twohp.com/s/Seq_Manual.pdf
- [1417] 2hp Seq product page (product_page): https://www.twohp.com/modules/p/seq

Full record as JSON: https://eurorackref.com/2hp/seq.json
