# Euclid (2hp)

Canonical page: https://eurorackref.com/2hp/euclid/

- id: `2hp/euclid`
- width: 2 HP; depth: 42 mm
- power: +12 V 21 mA, −12 V 2 mA, +5 V ? mA
- status: current
- functions: Euclidean rhythm, Trigger / Euclidean Sequencer

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Trig Input | trigger, gate, clock | advance pattern one step | not stated | unknown | — | 1390 |
| Reset Input | trigger, gate | reset to first step | not stated | unknown | — | 1390 |
| Length CV | cv | CV for Length | 0 to 5 V | unipolar | — | 1390 |
| Steps CV | cv | CV for Steps | 0 to 5 V | unipolar | — | 1390 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Trigger Output | trigger | trigger on active step | ≤ 5 V | unipolar | Euclidean pattern generator | 1390 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Length Knob | knob | pattern length | 1 to 16 steps | Euclidean pattern generator | 1390 |
| Steps Pot | knob | number of active steps | ≥ 1 steps | Euclidean pattern generator | 1390 |
| Offset Pot | knob | pattern start offset | ≥ 0 steps | Euclidean pattern generator | 1390 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 2 HP | — | 1390 |
| module | depth | 42 mm | — | 1390 |
| module | depth | 45 mm | — | 1391 |
| module | +12V current | 21 mA | — | 1390 |
| module | -12V current | 2 mA | — | 1390 |
| Euclidean pattern generator | pattern length | 1 to 16 steps | — | 1390 |
| Length CV | input range | 0 to 5 V | — | 1390 |
| Steps CV | input range | 0 to 5 V | — | 1390 |
| Trigger Output | pulse width | 6 ms | — | 1390 |
| Trigger Output | trigger level | 5 V | — | 1390 |

## Behavior

- Length Knob: when fully left → pattern 1 step [1390]
- Length Knob: when fully right → pattern 16 steps [1390]
- Steps Pot: when fully left → 1 active step [1390]
- Steps Pot: when center → half steps active [1390]
- Steps Pot: when fully right → entire pattern filled [1390]
- Offset Pot: when fully left → no offset [1390]
- Offset Pot: when fully right → offset length minus one [1390]
- Trigger Output: when advances to active step → outputs +5V trigger [1390]

## Sources

- [1390] 2hp Euclid manual (manual): https://www.twohp.com/s/2hp_Euclid.pdf
- [1391] 2hp Euclid product page (product_page): https://www.twohp.com/modules/p/euclid

Full record as JSON: https://eurorackref.com/2hp/euclid.json
